To prepare a 3D model for printing on the Bambu Lab Printers, you must use Bambu Studio. Bambu Studio is especially designed to work with Bambu Lab Printers.
When you are ready to begin slicing, simply open Bambu Studio, click Prepare and drag and drop your model to import
You may want to rotate or move around your model(s) for easier printing.
There are only five settings that you should be concerned with when printing.
This refers to the size of layers that the printer will use to make your print. By default, the slicer comes with a number of presets ranging from .05 mm to .25 mm. The smaller the number, the higher quality of the print and the longer the print will take. This can be changed by clicking the dropdown menu located on the right-hand side of the slicer near the top.
This should correspond to the type of material you plan on printing with. At the makerspace, we recommend printing with some variant of PLA. You can create your own filament profiles that better match your material's temperature and print settings. For normal PLA, the generic PLA material preset should suffice.
Make sure that this matches the printer model that you are planning on printing on. Using the wrong setting here could result in print failure and damage to the printer. You should always use the BambuLabs A1.
Some prints require supports to print correctly. Models that have significant overhangs or extend at severe angles will require them. Generally the option Everywhere will do a good job of ensuring your print is properly supported, but this process will apply supports liberally and do so in places where it isn't necessary.
Infill percentage determines how much of the inside of your 3D model is filled with your material. Higher percentages will mean slightly longer print times and significantly more material used, so don't overdo it.
If you have not loaded your filament yet, follow the guide below to load your printer.
Once you are ready to print, follow the following steps to send the print to the printer.